Yamaha - R -S500 - Stereo Amplifier

New product

Yamaha's R-S500 stereo receiver was designed with the music listener in mind. It offers inputs for a CD player, a turntable, a tape deck and more. 

More details

Avaliable

Warning: Last items in stock!

By buying this product you can collect up to 192 loyalty points. Your cart will total 192 loyalty points that can be converted into a voucher of ₹ 192.00.


₹ 38,490.00 tax incl.

Add to wishlist

More info

Yamaha's R-S500 stereo receiver was designed with the music listener in mind. It offers inputs for a CD player, a turntable, a tape deck and more. You'll find knobs to control volume, bass, treble, and balance. The R-S500 has a continuously variable loudness control, so you can hear all the detail in your favorite music at even the lowest volume. There's also a Pure Direct mode for your CD player so the music comes through with clarity rarely heard on a standard stereo.

Audio Features
ToP-ART/High Current Amplification: Yamaha uses the ToP-ART (Total Purity Audio Reproduction Technology) design concept, which combines the latest and best technologies, parts, and circuit designs, to maximize sound quality. High Current Amplification uses superior quality components from input to output to achieve high current power with low impedance.
High-Quality Power Amplifier: With 75 watts of power per channel (at 8 ohms, 20 Hz-20 kHz, 0.04% THD), the R-S500 delivers solid, reliable audio performance even when driving both A and B speakers at the same time.
Wide Frequency Response: The receiver's wide frequency response, 10Hz to 50kHz, allows you to enjoy the full fidelity of any source with two channel analog outputs.
Dual Zone Capability: The R-S500 allows you to play two different sources in two zones. The receiver has a pair of stereo preamp outputs for Zone 2. A separate amplifier or stereo receiver with a pair of speakers, or a powered speaker system is required for zone 2.
Loudness: The amount of loudness compensation is adjustable, using a rotary knob on the front panel.
Pure Direct: The Pure Direct feature bypasses the bass, treble, balance, and loudness controls for the best sound from any source.
Record Out Selector: Front panel rotary knobs let you listen to one source, while feeding a different source to the Tape and Line 1 outputs for recording.
Speaker Terminals: All of the receiver's speaker terminals are binding posts. They are not 5-way binding posts because a plastic collar prevents their use with spade lugs and they are too far apart for dual banana plugs.
Bi-Wire: Compatible speakers can be bi-wired using the A and B speaker terminals simultaneously (they are wired in parallel).
Impedance Switch: The R-S500 has an impedance switch, allowing operation with two pair of 6 ohm speakers.
Phono: The RCA phono input is designed for moving magnet (MM) turntable cartridges. If you have a moving coil (MC) cartridge a phono preamp is necessary.
Subwoofer Output: The stereo receiver is equipped with a mono-subwoofer output for connecting a powered sub.
Headphone Jack: The receiver has a standard 1/4" headphone jack on the front panel for private listening. When headphones are plugged in, the receiver's speaker output is not muted, so remember to turn the A and B speakers off.
Max Volume Adjustment: Use this feature to set the maximum volume level; used to avoid turning the volume too loud by mistake. You can set the Max Volume from -30 dB to +15 dB in 5 dB steps, or to +16.5 dB (full volume range is -89.5 dB to +16.5 dB).
Initial Volume Setting: Use this feature to specify the volume level when the power is turned on; choose between Off (same as the volume when the unit was turned off), Mute, and -89.5 dB to + 16.5 dB in 0.5 dB increments.
Power Management: The power (main room and Zone 2) can be set to turn off after a specific amount of time without any adjustments being made; options include 4, 8, or 12 hours.
Sleep Timer: The sleep timer turns the receiver off after 30, 60, 90, or 120 minutes.
Remote Control
RAX25 Remote Control: The remote control can operate the receiver as well as other remote control capable components from Yamaha and other manufacturers. The remote is pre-programmed with control signals for other brand TVs, VCRs, DVD player/recorders, Blu-ray disc players, DVRs, cable boxes, and satellite receivers, along with Yamaha CD player/recorders, MD player/recorders, tape decks, and LD players.
Remote Jack: The receiver a mini-jack input and output for use with other compatible components.

18 other products in the same category: